PEF_UDPDESTPORT#
code: 1724
# set
<module-index>/<port-index> PEF_UDPDESTPORT [<flow_index>, <filter_type>] <use> <value> <mask>
# get
<module-index>/<port-index> PEF_UDPDESTPORT [<flow_index>, <filter_type>] ?
Description#
Basic mode only. Defines UDP Destination Port settings used for the filter.
Note
For set
, the only allowed filter_type
is shadow-copy. .
Actions#
set, get
Parameters#
use
: byte, specifies the use of UDP Destination Port information
OFF = 0
ON = 1
Example#
# set
input: 0/1 PEF_UDPDESTPORT [1,0] OFF 0 0xFFFF
output: <OK>
# get
input: 0/1 PEF_UDPDESTPORT [1,0] ?
output: 0/1 PEF_UDPDESTPORT [1,0] OFF 0 0xFFFF