PE_CORRUPT#

code: 1660

# set
<module-index>/<port-index> PE_CORRUPT [<flow_index>] <corruption_type>

# get
<module-index>/<port-index> PE_CORRUPT [<flow_index>] ?

Description#

Configures impairment corruption type.

Note

IP / TCP / UDP corruption modes are not supported on default flow (0)

Actions#

set, get

Parameters#

  1. corruption_type: byte, corruption type

  • OFF = 0

  • ETH = 1

  • IP = 2

  • UDP = 3

  • TCP = 4

  • BER = 5

Example#

# set
input:  0/1 PE_CORRUPT [0] OFF
output: <OK>

# get
input:  0/1 PE_CORRUPT [0] ?
output: 0/1 PE_CORRUPT [0] OFF