P_PFCENABLE#

code: 373

# set
<module-index>/<port-index> P_PFCENABLE <cos_0> <cos_1> <cos_2> <cos_3> <cos_4> <cos_5> <cos_6> <cos_7>

# get
<module-index>/<port-index> P_PFCENABLE ?

Description#

This setting control whether a port responds to incoming Ethernet Priority Flow Control (PFC) frames, by holding back outgoing traffic for that priority.

Actions#

set, get

Parameters#

  1. cos_0: byte, whether PFC response is enabled for CoS 0

  • OFF = 0

  • ON = 1

  1. cos_1: byte, whether PFC response is enabled for CoS 1

  • OFF = 0

  • ON = 1

  1. cos_2: byte, whether PFC response is enabled for CoS 2

  • OFF = 0

  • ON = 1

  1. cos_3: byte, whether PFC response is enabled for CoS 3

  • OFF = 0

  • ON = 1

  1. cos_4: byte, whether PFC response is enabled for CoS 4

  • OFF = 0

  • ON = 1

  1. cos_5: byte, whether PFC response is enabled for CoS 5

  • OFF = 0

  • ON = 1

  1. cos_6: byte, whether PFC response is enabled for CoS 6

  • OFF = 0

  • ON = 1

  1. cos_7: byte, whether PFC response is enabled for CoS 7

  • OFF = 0

  • ON = 1

Example#

# set
input:  0/1 P_PFCENABLE OFF OFF OFF OFF OFF OFF OFF OFF
output: <OK>

# get
input:  0/1 P_PFCENABLE ?
output: 0/1 P_PFCENABLE OFF OFF OFF OFF OFF OFF OFF OFF