P_SPEEDSELECTION#

code: 109

# set
<module-index>/<port-index> P_SPEEDSELECTION <mode>

# get
<module-index>/<port-index> P_SPEEDSELECTION ?

Description#

The speed mode of an autoneg port with an interface type supporting multiple speeds.

Note

This is only a settable command when speed is selected at the port level. Use the M_CFPCONFIG command when speed is selected at the module level.

Actions#

set, get

Parameters#

  1. mode: byte, the speed mode of the port with an interface type supporting multiple speeds

  • AUTO = 0

  • F10M = 1

  • F100M = 2

  • F1G = 3

  • F10G = 4

  • F40G = 5

  • F100G = 6

  • F10MHDX = 7

  • F100MHDX = 8

  • F10M100M = 9

  • F100M1G = 10

  • F100M1G10G = 11

  • F2500M = 12

  • F5G = 13

  • F100M1G2500M = 14

  • F25G = 15

  • F50G = 16

  • F200G = 17

  • F400G = 18

  • F800G = 19

  • F1600G = 20

Example#

# set
input:  0/1 P_SPEEDSELECTION AUTO
output: <OK>

# get
input:  0/1 P_SPEEDSELECTION ?
output: 0/1 P_SPEEDSELECTION AUTO