PED_STEP

code: 1642

# set
<module-index>/<port-index> PED_STEP [<flow_index>, <impairment_type_index>] <low> <high>

# get
<module-index>/<port-index> PED_STEP [<flow_index>, <impairment_type_index>] ?

Description

Configuration of Step distribution (DELAY only).

Note

If the low/high is less than minimum latency, value is set to minimum latency. If the low/high is greater than maximum latency, value is set to maximum latency.

Actions

set, get

Parameters

  1. low: long integer, specifies the packet delay in the ‘low’ state of the step. Units = nanosecond (must be multiples of 100 ns).

  2. high: long integer, specifies the packet delay in the ‘high’ state of the step. Units = nanosecond (must be multiples of 100 ns).

Example

# set
input:  0/1 PED_STEP [0, 0] 1 1
output: <OK>

# get
input:  0/1 PED_STEP [0, 0] ?
output: 0/1 PED_STEP [0, 0] 1 1