Main Module Config

../../../_images/module_properties.png

Fig. 5.4 Module Properties

Identification

Table 5.7 Identification

Property

Explanation

Module Name

The Xena test module model type.

Module Revision

The Xena test module model type plus revision information if relevent.

Module Description

A user defined description of the Xena test module.

Serial Number

The Xena test module serial number.

Version Number

The currently loaded firmware version number.

Firmware

This button allows you to manually upgrade this module with a firmware image that has been uploaded using the controls in the chassis panel. Usually, it is recommended that you use the firmware upgrade functions in the ChassisUpgrader program as this provides a more automated and user-friendly approach.

Port Count

The number of detected ports on the module.

Status

Table 5.8 Status

Property

Explanation

Module Temperature

The current module temperature in degrees (Celsius).

Reservation

Table 5.9 Reservation

Property

Explanation

Reserved By

If the module is currently reserved by someone this field contains the username of the reserver.

Media Configuration

Table 5.10 Media Configuration

Property

Explanation

CFP Type

Describes the type of CFP. The following values are supported

  • Not a CFP: This is not a CFP-based test module.

  • CFP (Not Present): No transceiver, the CFP cage is empty.

  • CFP (Not Flexible): Transceiver present, supporting a fixed speed and port-count.

  • CFP (Flexible): Transceiver present, supporting flexible speed and port-count.

If CFP type is Not a CFP configuration and speed settings cannot be changed at module level. It may be possible to change speed at port level. For the other values it is possible to change Media Configuration i.e. which cage(s) are used on the module and if relevant in what configuration. It may also be possible to change Port Configuration i.e. number of ports and port speed.

Media Configuration

This property specifies which cage(s) are used on the module and if relevant in what configuration

Port Configuration

If enabled this property specifies number of ports and port speed on the module

Note

This property is not supported for non-CFP modules.