Forward Pressure Test Options#

../_images/forward_pressure_config.png

Fig. 19 Forward Pressure Test Options#

Common Options#

  • Duration

    The duration of each test trial in seconds.

  • Iterations

    The number of times to repeat each test trial with the same set of test parameters.

Test Options#

  • Interframe Gap Delta

    The difference between the default inter-frame Gap (IFG) value of 20 bytes and the reduced value used on the source port.

  • Accept. Rx Util. Delta

    The acceptable receive rate utilization delta, i.e. the value with which the receive rate is allowed to exceed 100.0%.

Port Role Configuration#

  • Used?

    If checked the port will be used in this test.

  • Port Role

    Used to place the port in either Source or Destination.

Note

Only one source and one destination are allowed in this test.