8.2. Test Type Selection and Configuration

Fig. 8.2 Test Type Selection and Configuration

This sub-panel allows you to select which tests to perform and to configure the options for each test. The tests are grouped according to RFC 3918.

To enable a test just make sure that the checkbox next to the test name is checked.

To configure a test select the test in the tree view and set the options in the panel to the right.

• Group Join/Leave Delay Options
  • Common Options
  • Delay Settings
  • Rate Settings
• Multicast Group Capacity Options
  • Common Options
  • Multicast Group Count
  • Delay Settings
  • Rate Settings
• Aggregated Multicast Throughput Options
  • Common Options
  • Multicast Group Count Selection
  • Delay Settings
  • Rate Settings
• Scaled Group Forwarding Matrix Options
  • Common Options
  • Multicast Group Count
  • Delay Settings
  • Rate Settings
• Mixed Class Throughput Options
  • Common Options
  • Multicast Group Count Selection
  • Delay Settings
  • Rate Settings
• Multicast Latency Options
  • Common Options
  • Multicast Group Count Selection
  • Delay Settings
  • Rate Settings
• Burdened Group Join Delay Options
  • Common Options
  • Delay Settings
  • Rate Settings
• Burdened Multicast Latency Options
  • Common Options
  • Multicast Group Count Selection
  • Delay Settings
  • Rate Settings