TX Configuration

Error Counters

Obtain the error count of each alarm, PCS Error, FEC Error, Header Error, Align Error, BIP Error, and High BER Error.

Corresponding CLI command: PP_ALARMS_ERRORS

# TX Configuration - Error Counters
resp = await port.pcs_pma.alarms.errors.get()
resp.total_alarms
resp.los_error_count
resp.total_align_error_count
resp.total_bip_error_count
resp.total_fec_error_count
resp.total_header_error_count
resp.total_higher_error_count
resp.total_pcs_error_count
resp.valid_mask

Error Generation Rate

The rate of continuous bit-level error injection. Errors are injected evenly across the SerDes where injection is enabled.

Corresponding CLI command: PP_TXERRORRATE

# TX Configuration - Error Generation Rate
resp = await port.pcs_pma.error_gen.error_rate.get()
resp.rate

Error Generation Inject

Inject a single bit-level error into the SerDes where injection has been enabled.

Corresponding CLI command: PP_TXINJECTONE

# TX Configuration - Error Generation Inject
await port.pcs_pma.error_gen.inject_one.set()

Error Injection

Inject a particular kind of CAUI error into a specific physical lane.

Corresponding CLI command: PP_TXLANEINJECT

# TX Configuration - Error Injection
await port.pcs_pma.lanes[0].tx_error_inject.set_alignerror()
await port.pcs_pma.lanes[0].tx_error_inject.set_bip8error()
await port.pcs_pma.lanes[0].tx_error_inject.set_headererror()

Lane Configuration

The virtual lane index and artificial skew for data transmitted on a specified physical lane.

Corresponding CLI command: PP_TXLANECONFIG

# TX Configuration - Lane Configuration
await port.pcs_pma.lanes[0].tx_config.set(virt_lane_index=1, skew=10)

resp = await port.pcs_pma.lanes[0].tx_config.get()
resp.virt_lane_index
resp.skew