TPLD

Note

Applicable to Chimera port only.

TPLD ID Configuration

Defines the TPLD filter configuration. There are only 16 TPLD filter, thus the index values are from 0 to 15.

Note

For SET, the only allowed _filter_type is shadow-copy.

Corresponding CLI command: PEF_TPLDCONFIG

await filter.tpld.test_payload_filters_config[0].set(use=enums.OnOff.ON, id = 2)
await filter.tpld.test_payload_filters_config[0].set(use=enums.OnOff.OFF, id = 2)
await filter.tpld.test_payload_filters_config[1].set(use=enums.OnOff.ON, id = 4)
await filter.tpld.test_payload_filters_config[1].set(use=enums.OnOff.OFF, id = 4)
await filter.tpld.test_payload_filters_config[2].set(use=enums.OnOff.ON, id = 6)
await filter.tpld.test_payload_filters_config[2].set(use=enums.OnOff.OFF, id = 6)
await filter.tpld.test_payload_filters_config[3].set(use=enums.OnOff.ON, id = 8)
await filter.tpld.test_payload_filters_config[3].set(use=enums.OnOff.OFF, id = 8)
await filter.tpld.test_payload_filters_config[4].set(use=enums.OnOff.ON, id = 10)
await filter.tpld.test_payload_filters_config[4].set(use=enums.OnOff.OFF, id = 10)
await filter.tpld.test_payload_filters_config[5].set(use=enums.OnOff.ON, id = 20)
await filter.tpld.test_payload_filters_config[5].set(use=enums.OnOff.OFF, id = 20)
await filter.tpld.test_payload_filters_config[6].set(use=enums.OnOff.ON, id = 40)
await filter.tpld.test_payload_filters_config[6].set(use=enums.OnOff.OFF, id = 40)
await filter.tpld.test_payload_filters_config[7].set(use=enums.OnOff.ON, id = 60)
await filter.tpld.test_payload_filters_config[7].set(use=enums.OnOff.OFF, id = 60)
await filter.tpld.test_payload_filters_config[8].set(use=enums.OnOff.ON, id = 80)
await filter.tpld.test_payload_filters_config[8].set(use=enums.OnOff.OFF, id = 80)
await filter.tpld.test_payload_filters_config[9].set(use=enums.OnOff.ON, id = 100)
await filter.tpld.test_payload_filters_config[9].set(use=enums.OnOff.OFF, id = 100)
await filter.tpld.test_payload_filters_config[10].set(use=enums.OnOff.ON, id = 102)
await filter.tpld.test_payload_filters_config[10].set(use=enums.OnOff.OFF, id = 102)
await filter.tpld.test_payload_filters_config[11].set(use=enums.OnOff.ON, id = 104)
await filter.tpld.test_payload_filters_config[11].set(use=enums.OnOff.OFF, id = 104)
await filter.tpld.test_payload_filters_config[12].set(use=enums.OnOff.ON, id = 106)
await filter.tpld.test_payload_filters_config[12].set(use=enums.OnOff.OFF, id = 106)
await filter.tpld.test_payload_filters_config[13].set(use=enums.OnOff.ON, id = 108)
await filter.tpld.test_payload_filters_config[13].set(use=enums.OnOff.OFF, id = 108)
await filter.tpld.test_payload_filters_config[14].set(use=enums.OnOff.ON, id = 110)
await filter.tpld.test_payload_filters_config[14].set(use=enums.OnOff.OFF, id = 110)
await filter.tpld.test_payload_filters_config[15].set(use=enums.OnOff.ON, id = 200)
await filter.tpld.test_payload_filters_config[15].set(use=enums.OnOff.OFF, id = 200)

resp = await filter.tpld.test_payload_filters_config[0].get()
resp.use
resp.id

Settings

Defines if filtering on TPLD field in a packet is used for flow filtering. The TPLD filter allows filtering based on the Xena TPLD ID. The TPLD ID is meta data, which can be inserted into the Ethernet packets by Xena traffic generators. For each flow filter, can the filter be based on 16 TPLD ID values.

Note

For SET, the only allowed _filter_type is shadow-copy.

Corresponding CLI command: PEF_TPLDSETTINGS

await filter.tpld.settings.set(action=enums.InfoAction.EXCLUDE)
await filter.tpld.settings.set(action=enums.InfoAction.INCLUDE)

resp = await filter.tpld.settings.get()
resp.action