Multicast

Mode

A multicast mode for a port. Ports can use the IGMPv2 protocol to join or leave multicast groups, either on an on-off basis or repeatedly.

Corresponding CLI command: P_MULTICAST

# Multicast Mode
await port.multicast.mode.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastOperation.JOIN,
    second_count=10)
await port.multicast.mode.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastOperation.JOIN,
    second_count=10)
await port.multicast.mode.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastOperation.LEAVE,
    second_count=10)
await port.multicast.mode.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastOperation.OFF,
    second_count=10)
await port.multicast.mode.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastOperation.ON,
    second_count=10)

resp = await port.multicast.mode.get()
resp.ipv4_multicast_addresses
resp.operation
resp.second_count

Extended Mode

A multicast mode for a port. Ports can use the IGMPv2/IGMPv3 protocol to join or leave multicast groups, either on an on-off basis or repeatedly.

Corresponding CLI command: P_MULTICASTEXT

# Multicast Extended Mode
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.EXCLUDE,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV3
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.INCLUDE,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV3
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.JOIN,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.LEAVE,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.LEAVE_TO_ALL,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.GENERAL_QUERY,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.GROUP_QUERY,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.ON,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)
await port.multicast.mode_extended.set(
    ipv4_multicast_addresses=[],
    operation=enums.MulticastExtOperation.OFF,
    second_count=10,
    igmp_version=enums.IGMPVersion.IGMPV2
)

resp = await port.multicast.mode_extended.get()
resp.ipv4_multicast_addresses
resp.operation
resp.second_count
resp.igmp_version

Source List

Multicast source list of the port. Only valid if the IGMP protocol version is IGMPv3 set by P_MULTICASTEXT.

Corresponding CLI command: P_MCSRCLIST

# Multicast Source List
await port.multicast.source_list.set(ipv4_addresses=[])

resp = await port.multicast.source_list.get()
resp.ipv4_addresses

Header

Allows addition of a VLAN tag to IGMPv2 and IGPMv3 packets.

Corresponding CLI command: P_MULTICASTHDR

# Multicast Header
await port.multicast.header.set(header_count=1, header_format=enums.MulticastHeaderFormat.VLAN, tag=10, pcp=0, dei=0)
await port.multicast.header.set(header_count=0, header_format=enums.MulticastHeaderFormat.NOHDR, tag=10, pcp=0, dei=0)

resp = await port.multicast.header.get()
resp.header_count
resp.header_format
resp.tag
resp.pcp
resp.dei