4.3.2.1. an config

Important

This command only changes the local AN configuration state. To execute the configuration, you need to run anlt start, otherwise your changes will not take effect on the tester.

4.3.2.1.1. Description

Configure AN of the working port.

4.3.2.1.2. Synopsis

an config
[--on/--off]
[--loopback/--no-loopback]

4.3.2.1.3. Arguments

4.3.2.1.4. Options

--on/--off

Enable or disable auto-negotiation on the working port, default to --on.

--loopback/--no-loopback

Should loopback be allowed in auto-negotiation, default to --no-loopback.

4.3.2.1.5. Examples

Autoneg should be enabled and allow loopback

xoa-utils[123456][port0/2] > an config --on --loopback

AN configuration to be on port 2/0
[SHADOW CONFIG]
    Auto-negotiation      : on (allow loopback: yes)
    Link training         : off (auto) (preset0: standard tap values)

xoa-utils[123456][port0/2] >