Media

Media Configuration

For the test modules that support media configuration (check M_CAPABILITIES), this command sets the desired media type (front port).

Corresponding low-level API class: M_MEDIA

# Media Configuration
await module.media.set(media_config=enums.MediaConfigurationType.BASE_T1)
await module.media.set(media_config=enums.MediaConfigurationType.BASE_T1S)
await module.media.set(media_config=enums.MediaConfigurationType.CFP)
await module.media.set(media_config=enums.MediaConfigurationType.CFP4)
await module.media.set(media_config=enums.MediaConfigurationType.CXP)
await module.media.set(media_config=enums.MediaConfigurationType.OSFP800)
await module.media.set(media_config=enums.MediaConfigurationType.OSFP800_ANLT)
await module.media.set(media_config=enums.MediaConfigurationType.QSFP112)
await module.media.set(media_config=enums.MediaConfigurationType.QSFP112_ANLT)
await module.media.set(media_config=enums.MediaConfigurationType.QSFP28_NRZ)
await module.media.set(media_config=enums.MediaConfigurationType.QSFP28_PAM4)
await module.media.set(media_config=enums.MediaConfigurationType.QSFP56_PAM4)
await module.media.set(media_config=enums.MediaConfigurationType.QSFPDD_NRZ)
await module.media.set(media_config=enums.MediaConfigurationType.QSFPDD_PAM4)
await module.media.set(media_config=enums.MediaConfigurationType.QSFPDD800)
await module.media.set(media_config=enums.MediaConfigurationType.QSFPDD800_ANLT)
await module.media.set(media_config=enums.MediaConfigurationType.SFP112)
await module.media.set(media_config=enums.MediaConfigurationType.SFP28)
await module.media.set(media_config=enums.MediaConfigurationType.SFP56)
await module.media.set(media_config=enums.MediaConfigurationType.SFPDD)

resp = await module.media.get()
resp.media_config

Supported Media

Shows the available speeds on a module. The structure of the returned value is [ <cage_type> <available_speed_count> [<ports_per_speed> <speed>] ]. [<ports_per_speed> <speed>] is repeated until all speeds supported by the <cage_type> has been listed. [<cage_type> <available_speed_count>] is repeated for all cage types on the module including the related <ports_per_speed> <speed> information.

Corresponding low-level API class: M_MEDIASUPPORT

resp = await module.available_speeds.get()
resp.media_info_list

Port Configuration

This property defines the current number of ports and the speed of each of them on a CFP test module. The following combinations are possible: 2x10G, 4x10G, 8x10G, 2x25G, 4x25G, 8x25G, 1x40G, 2x40G, 2x50G, 4x50G, 8x50G, 1x100G, 2x100G, 4x100G, 2x200G, and 1x400G.

Note

<portspeed_list> is a list of integers, where the first element is the number of ports followed by a number of port speeds in Mbps.

The number of port speeds equals the value of the number of ports.

For example if the configuration is 4x25G, <portspeed_list> will be [4, 25000, 25000, 25000, 25000].

Corresponding low-level API class: M_CFPCONFIGEXT

# Port Configuration
await module.cfp.config.set(portspeed_list=[1, 800000])
await module.cfp.config.set(portspeed_list=[2, 400000, 400000])
await module.cfp.config.set(portspeed_list=[4, 200000, 200000, 200000, 200000])
await module.cfp.config.set(portspeed_list=[8, 100000, 100000, 100000, 100000, 100000, 100000, 100000, 100000])

resp = await module.cfp.config.get()
resp.portspeed_list