PP_PHYAUTOTUNE

code: 360

# set
<module-index>/<port-index> PP_PHYAUTOTUNE [<serdes_index>] <on_off>

# get
<module-index>/<port-index> PP_PHYAUTOTUNE [<serdes_index>] ?

Description

Enable or disable the automatic receiving of PHY retuning (see PP_PHYRETUNE), which is performed on the 25G interfaces as soon as a signal is detected by the transceiver. Useful if a bad signal causes the PHY to continuously retune or if for some other reason it is preferable to use manual retuning (PP_PHYRETUNE).

Actions

set, get

Parameters

on_off: short integer, Enable/disable automatic receiving PHY retuning. Default is enabled

Example

# set
input:  0/1 PP_PHYAUTOTUNE [0] OFF
output: <OK>

# get
input:  0/1 PP_PHYAUTOTUNE [0] ?
output: 0/1 PP_PHYAUTOTUNE [0] OFF