P4G_RAW_TX_DURING_RAMP
# set
<module-index>/<port-index> P4G_RAW_TX_DURING_RAMP [<group_index>] <should_close_conn_ramp_up> <should_close_conn_ramp_down>
# get
<module-index>/<port-index> P4G_RAW_TX_DURING_RAMP [<group_index>] ?
Description
Specify if TCP payload transmission should take place during ramp-up and ramp-down.
Note
For UDP connections payload transmission will always take place during ramp-up and ramp-down, and this parameter is therefore N/A.
Actions
set, get
Parameters
Example
# set
input: 0/1 P4G_RAW_TX_DURING_RAMP [0] NO NO
output: <OK>
# get
input: 0/1 P4G_RAW_TX_DURING_RAMP [0] ?
output: 0/1 P4G_RAW_TX_DURING_RAMP [0] NO NO