Forward Pressure Test Options#
![../_images/forward_pressure_config.png](../_images/forward_pressure_config.png)
Fig. 19 Forward Pressure Test Options#
Common Options#
Duration
The duration of each test trial in seconds.
Iterations
The number of times to repeat each test trial with the same set of test parameters.
Test Options#
Interframe Gap Delta
The difference between the default inter-frame Gap (IFG) value of 20 bytes and the reduced value used on the source port.
Accept. Rx Util. Delta
The acceptable receive rate utilization delta, i.e. the value with which the receive rate is allowed to exceed 100.0%.
Port Role Configuration#
Used?
If checked the port will be used in this test.
Port Role
Used to place the port in either Source or Destination.
Note
Only one source and one destination are allowed in this test.