Router Test Case

Router test case which designed for router. One port is assigned as the WAN port, and others will be assigned as LAN ports. Test will send one stream from each LAN port to WAN port and send one stream from WAN port to each LAN port.

The testbed setup is shown as in Fig. 39.

../_images/xtlc_router.png

Fig. 39 Router Test Case diagram

The Router test case can be implemented by Xena2544 with Block topology + Bidirectional L3 traffic.

../_images/xtlc_router_1.png

Fig. 40 Set topology to Block + Bidirectional

../_images/xtlc_router_2.png

Fig. 41 Assign one port to a group and others the other group. Assign L3 profile to ports

  1. Select all the test ports.

  2. Choose Block topology and Bidirectional traffic.

  3. Assign one port (WAN port) to a group, and the others (LAN ports) the other group.

  4. Use L3 profile on ports.