4. Getting Started

This manual contains some examples of basic Xena2544 configurations to get you started using the application.

• 4.1. Step-By-Step Guide
  • Add Chassis
  • Add/Configure Port/s
  • Protocol Segment Profiles
  • Test Configuration
  • Multi-Stream configuration
  • Reporting
  • Save and Start
• 4.2. Layer-2 Tests
  • Ethernet Point-to-Point Test
  • Adding VLAN Tag
• 4.3. Layer-3 Tests
  • IPv4 Point-to-Point Test
  • IPv4/UDP Blocks Test
  • IPv6 Mesh Test